OKI 1.2 Manuel d'utilisateur télécharger pdf (Page 29)

• For the LAN connection, a

password entry prompt will

appear. Enter the password, and

click on the

OK button. The

product has been shipped with

“TA” set as the default password.

• When the connection settings are

completed, the

Main

window is displayed.

When the Data setting and

Status buttons become

active, the connection is

established.

Changing Modes and Setup Conditions

The mode of VoIP-TA can be switched by using the Maintenance Console

Software.

To change the current setup conditions, switch the VoIP-TA to the setup

mode (it is not necessary to switch the VoIP-TA to the setup mode if you

only want to display the setup conditions).

Changing to the Setup mode

• Click on Mode (M) on the

menu bar of the Main window

and select the Change mode

on the pull-down menu.

• The

Mode change prompt is

displayed.

• Select the

Setup mode on the

Mode pull-down menu and

click the OK button.

• Changing VoIP-TA to other modes is performed in the same way.

The VoIP-TA mode will change although it may take a little time for the mode to

be changed.

Setup

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 59 60

Pas de commentaire

OKI 1.2 Manuel d'utilisateur Page 29