OKI 1.2 Manuel d'utilisateur télécharger pdf (Page 15)

Installation

Cautions

During installation

• All cables used to connect the equipment must be accessories of the

equipment or suitable to fit the equipment.

• Make sure the AC power plug is disconnected from the power outlet

when connecting the FG cable to the unit.

• When an exchange machine, such as PBX or EKTS is connected to the

TEL port of VoIP-TA, the sound quality may deteriorate. Only one

exchange machine should therefore be relayed between the VoIP-TA unit

and telephones.

• Interference noise may occur during telephone calls in areas that receive

strong radio waves, such as near a broadcasting station or CB radio

transmission. If calls are affected in this way, consult your authorized

sales agent or service office.

• Do not install the VoIP-TA unit near equipment that generates

magnetism or radio waves such as TV sets, radios, radio machines,

microwave ovens, or inverter-type fluorescent lamps, as this may cause

the unit to malfunction.

During use

• Do not subject the unit to strong impact, such as dropping the unit.

• Do not force cables to connect or disconnect as this may result in faults.

The connector and port should join with reasonable ease.

• When cleaning the exterior of the VoIP-TA, turn it off and disconnect the

unit (by pulling the power plug, not the cord), wipe it with a water damp

cloth and wipe it dry with a soft dry cloth. Do not use volatile thinner,

alcohol or a silicon cleaner under any circumstances as it may result in

damage, discoloration or deformation.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

Pas de commentaire

OKI 1.2 Manuel d'utilisateur Page 15