Oki 520 Manuel d'utilisateur télécharger pdf (Page 68)

With Forms Tear-Off Set to ON

SEL

POWER

FF/LOAD

TEAR PARK QUIET

SHIFT

Micro Feed

Down

TOF

Micro Feed

EXIT

GROUP

SET

PRINTITEM

ALARM MENU

First: Check/Set the Tear Position

1. Turn the printer ON and press PARK to remove the

paper from the path.

The alarm light comes on.

2. Press SHIFT and QUIET/TOF to reset the Top of Form.

3. Press FF/LOAD to pull the paper back in.

The Alarm light goes out.

4. Press SELECT to take the printer off-line.

The SEL light goes out.

5. Wait until the paper moves up to the Tear position.

6. To change the tear-off position: press and hold SHIFT,

then press LF/Micro Feed Up to move the tear-off

position down or FF/LOAD/Micro Feed Down to move

the tear-off position up.

Next, Set the Top of Form Position

1. Press SHIFT and TEAR.

The paper goes to the current TOF position.

2. Continue holding SHIFT and release TEAR.

3. Continue holding SHIFT, then press LF/Micro Feed Up

to move the TOF location down on the page or FF/

LOAD/Micro Feed Down to move the TOF location up.

The first line of printing is indicated by the red line (1)

on the printhead’s plastic shield.

4. Keep holding the SHIFT button and press the

QUIET/TOF button a few times to engage the new

setting.

5. Press SELECT to place the printer back on line.

1 2 ... 63 64 65 66 67 68

Pas de commentaire

Oki 520 Manuel d'utilisateur Page 68