Oki 520 Manuel d'utilisateur télécharger pdf (Page 39)

E-32 Section 3

Using the Printer's Features

Tear Feature

When you’re using continuous forms with either the

built-in rear-feed tractor or the optional bottom-feed push

tractor, you can use this feature to advance the forms up

to the tear position so you can easily tear off a printed

sheet without wasting paper or readjusting the printer. To

do this, simply press the TEAR button on the front panel.

TEAR

SET

The tear feature can NOT be used when the op-

tional pull tractor is installed!

Forms Tear-off Feature

Never engage Forms Tear-off when printing on

labels!

The Forms Tear-off feature automatically moves the

paper up to the tear position after the selected interval.

When the printer receives data, it will move down to the

initial printing position.

This feature is normally turned off. To activate it:

SEL

POWER

FF/LOAD

TEAR PARK QUIET

SHIFT

Micro Feed

Down

TOF

Micro Feed

EXIT

GROUP

SET

PRINTITEM

ALARM MENU

1. Hold the SHIFT button ( ) and press the SEL button

( ) to enter the Menu mode.

2. Press the GROUP button ( ) until the line

Rear Feed Form Tear-Off Off

prints.

3. Press the SET button ( ) until the time interval you

wish to select prints .

4. Hold the SHIFT button ( ) and press the SEL button

( ) to exit the Menu mode and save the setting.

Some programs pause occasionally while sending

data. If the pause lasts more than the selected interval,

the paper will advance to the tear-off position until

more data is received. This extra paper movement can

cause uneven print registration in graphics. If you

have this problem, use the menu to deactivate Forms

Tear-Off.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Oki 520 Manuel d'utilisateur Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Oki 520