Oki MC363dn Manuel d'utilisateur télécharger pdf (Page 134)

Troubleshooting > 134

> If the sheet is low down in this area and difficult to remove, it is probably still

gripped by the fuser. In this case raise the output tray, reach around and press

down on the fuser pressure release lever (d).

11. If you are not using the rear exit tray, close it once any paper has been removed

from this area.

12. Pull out the paper tray and ensure that all paper is stacked properly, is undamaged,

and that the paper guides are properly positioned against the edges of the paper

stack. When satisfied, replace the tray.

13. Close the output tray and press down firmly so that the cover latches closed.

14. Gently lower the scanner.

When the jam has been cleared, if Jam Recovery is enabled in the Printer Adjust menu,

the MFP will attempt to reprint any pages lost due to paper jams.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 145 146

Pas de commentaire

Oki MC363dn Manuel d'utilisateur Page 134